HelpFIT
Go to navigation

Windows 10

Automatic installation

  1. Download the PrintFIT printer driver and installer archive from this link.

    Warning:

    When downloading a file, your browser may warn you that it may be a virus or malware. Confirm that you want to download the file anyway.

    Since the file in the archive is not digitally signed, even Windows Defender or other antivirus can detect this suspicion after unpacking the archive.

  2. Run the PrintFIT.exe file, which is located inside the downloaded archive.
  3. Confirm to run the program as an administrator. An installation window in Windows PowerShell will be launched, where the installation will take place.
  4. When finished, choose whether you want PrintFIT set as your default printer in the pop-up window.
  5. The printer properties window will appear. Go to the Device Settings tab and set your CTU username here using this procedure.
  6. Close the printer properties window with the OK button.

Detailed manual installation

  1. Download KX_Universal_Printer_Driver.zip driver file from kyoceradocumentsolutions.eu.
  2. Select the Start menu in the lower left corner and select Settings › Devices › Printers and scanners.

  3. Choose Add a printer or scanner.

    win install 1 en

  4. Select The printer that I want isn’t listed.

    win install 2 en

  5. Select Add a printer using a TCP/IP address or hostname.

    win install 3 en

  6. Fill in the field Hostname or IP address with the value print.fit.cvut.cz.

    win install 4 en

  7. In the Device Type section, select Custom and press the Settings…​​ button.

    win install 5 en

  8. In the Protocol section, select the LPR option, and then in the LPR Settings section, enter the value fit in the Queue Name field. Don’t forget to check LPR Byte Counting Enabled.

    Confirm OK and continue.

    win install 6 en

  9. Press Have Disk…​ to continue.

    win install 7 en

  10. Press Browse…​.

    win install 8 en

  11. Open the folder with the downloaded drivers, proceed to en\64bit or en\32bit (depending on your architecture), and select the OEMSETUP file.

    win install 9 en

  12. Confirm OK.

    win install 10 en

  13. Select the Kyocera CS 6053ci KX option.

    win install 11 en

  14. Continue by naming the printer. Choose a name of your choice, for example PrintFIT.

    win install 12 en

  15. Disable sharing by selecting Do not share this printer.

    win install 13 en

  16. Confirm by selecting Finish.

    win install 14 en

  17. There is now a new printer under the selected name in the printers menu. Select and choose Manage.

    win install 15 en

  18. In the left menu, select Printer properties.

    win install 16 en

  19. Press Preferences…​

    win install 17 en

  20. In the lower right section, set the default colour to Black. Confirm the choice with OK.

    win install 18 en

  21. In the initially displayed window, switch to the Device Settings tab.

    win install 19 en

  22. In the Device Options menu, check the following options:

    win install 20 en win install 21 en

    • Paper Feeder (cassette 1, 2)
    • Large Capacity Feeder (cassette 3, 4)
    • 4000-sheet Finisher…​
      • In the Punch Settings pop-up window, choose 2 and 4 holes
    • Folding unit

  23. If the name of your user account in the system is different from your CTU username, use the following procedure, but without guarantee.

    Caution:

    On the part of ICT, for trouble-free printing, only settings are supported where the name of your user account in the system is the same as the assigned username of CTU.

    1. Click the User…​ button.

      win install 22 en

    2. Enter your CTU username in the User name field. Confirm the choice with OK.

      win install 23 en

  24. The printer is now set up on your computer and can be used normally. When printing a document, select the PrintFIT printer.

    The document is uploaded to the print server. To print, just go to any printer and authorize yourself.

Advanced printing settings

Two-sided printing (duplex)

In the Kyocera Print Panel application, select the Basic panel.

win duplex en

Stapling, punching and folding

In addition to printing, large-format printers can also be used for stapling, punching and folding.

When printing a specific document, select the PrintFIT printer, press print preferences and go to the Finishing section.

win finishing en
Figure 1. Example of stapling and punching settings
win booklet en
Figure 2. Example of the folding settings (booklet)